Forum quick links
solid surface for countertops
EBOM-v4 MRc3:Purchasing - facility maintenance and renovationposted by Pablo Fortunato Suarez on
The scope of materials covers - thermal and acoustic insulation, flooring materials and finishes, ceiling materials and finishes and wall materials and finishes.
ESVE Requirement
Pilot-Credits LTpc70:Green vehiclesposted by Joshua Chia on
Hi, hope someone can help clarify whether the requirement for the ESVE to be capable of participating in a demand-response program or time-of-use pricing means that we must participate in either on
Special purpose faucets
Schools-2009 WEc4:Process water use reductionposted by Alicja Bieszyńska on
In the school's kitchen we have one separate faucet for washing the dishes (it's not pre-rinse spray, but for full washing) and one for filling the pots.
Mixed waste definition
NC-2009 MRc2:Construction Waste Managementposted by Ibrahim El-Shair on
What is the exact definition of MIXED WASTE that mentioned in the table of volume/ weight conversion table for 2009 version?
Ashrae 90.1 PRM software
CS-2009 EAc1:Optimize Energy Performanceposted by Ciaran McCabe on
I am just wondering what people's opinion is on Tranes trace software and eQuest software.
Energy modeling for an industrial facility
NC-2009 EAc1:Optimize Energy Performanceposted by Mohamed M. Abd Elhameed on
I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans.
Energy modeling for an industrial facility
NC-2009 EAc1:Optimize Energy Performanceposted by Mohamed M. Abd Elhameed on
I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans.
Energy modeling for an industrial facility
NC-2009 EAc1:Optimize Energy Performanceposted by Mohamed M. Abd Elhameed on
I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans.
Energy modeling for an industrial facility
NC-2009 EAc1:Optimize Energy Performanceposted by Mohamed M. Abd Elhameed on
I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans.
LEED HC 2009 - IEQc8.1 Daylight
Healthcare-v2009 IEQc8.1:Daylight and views - daylightposted by Christie Morris-Withers on
In order to get this credit it appears that all windows with "high-contrast situations" must have glare control devices. Are these devices also required to be view-preserving and automated?