Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Maximum frontage without windows on primary facade

Pilot-Credits PC14:Walkable Streets
posted by  Margaret Montgomery  on 

The project I'm testing this pilot credit with meets all but requirement 8, so the pilot credit has been "met".

1
Fri Nov 4, 2016, 8:25 pm

Private Green Roof

CS-2009 SSc5.2:Site Development—Maximize Open Space
posted by  Luis Miguel Diazgranados  on 

Hi, I am working in a C&S LEED project and have doubts about vegetation that it expect to use for meet the 25 % of open space area.

1
Wed Apr 6, 2016, 9:21 pm
1
Wed Jan 27, 2016, 3:43 pm

Participate in LEEDuser Pilot Credit Forum

Pilot-Credits EQpc44:Ergonomics approach for computer users
posted by  Henry Mak  on 

Hi everyone, I have a silly question. For the evidence of participating in LEEDuser Pilot Credit Forum, what document could show this action?

1
Thu Jan 21, 2016, 2:46 pm

100% Tenant

CS-2009 EAc5.1:Measurement and Verification—Base Building
posted by  Emmanuel Pauwels  on 

We are working in a project that will have a single tenant occupying the whole building.

1
Thu Jan 21, 2016, 3:46 pm

Inconsistency between BD+C and O+M

CS-v4 EQc1:Enhanced indoor air quality strategies
posted by  Adam Stoker  on 

Despite efforts to better align the rating systems in LEED v4, there are some inconsistencies between the Enhanced Indoor Air Quality Strategies credits in BD+C and O+M.

0

Duct Insulation to meet ASHRAE 90.1

NC-2009 EAp1:Fundamental Commissioning of Building Energy Systems
posted by  Ralph Bicknese  on 

We have a condition at where the contractor has asked to use blue duct for underground locations in lieu of Armaflex insulation and concrete encasement.

1
Fri Jan 22, 2016, 4:33 pm

µg not µm?

NC-2009 IEQc3.1:Construction IAQ Management Plan—During Construction
posted by  Takayuki Hirota  on 

Reference guide Addenda allows to use filtration media with a minimum dust spot efficiency of 30% or higher and greater than 90% arrestance on a particle size of 3–10 "µg". I suppose it is "µm" no

1
Fri Jan 22, 2016, 2:45 pm

Modeling semi heated space with mechanical ventilation

NC-2009 EAp2:Minimum Energy Performance
posted by  Ashwin Kumar  on 

We are working on the energy modeling for Industrial Manufacturing facility in which some places can be classified as “Semi heated spaces” as per ASHRAE 90.1 2007 definition.

1
Fri Jan 22, 2016, 3:18 pm

Very high density in a rapidly developing area

NC-2009 SSc2:Development Density and Community Connectivity
posted by  Susan Di Giulio  on 

Hi, Our project is a campus filling a city block across the street from the premier sports stadium, a huge entertainment complex and a convention center in major US city.

1
Sat Jan 23, 2016, 12:11 am