Dear all, I'm now working on a project (office building, new construction) under LEED NC v2009 Certification.

Hello, we have non compliant faucets and showerheads, therefore, we are going to install flow restrictors. Would we need to test them at 60 and 80 psi?

I was wondering if some packaging of products that adress IEQ requirements but also attend one or more MRc1 criteria can be used here, like soap packing. Other question is, shampoo and/or band-aid

Hello, For complicated planning reasons on a large (probably Campus) project some preliminary earthmovement and demolition will take place soon, but the project is not yet registered.

General Question: If a project is submitting their LEED information in the two part Design and Construction approach, do all the of credits which are noted as being "Design" credits have to actual

Is there any tool or program available to see the number of LEED Associates and AP Specialists worldwide?

Could anyone confirm if the case 2 addenda (11/3/2010) could be relevant to Greenfield developments as well? What would the documentation that must be submitted be?

Could anyone kindly clarify the following issue: I work with a project on construction of industrial plant.

We are busy with a fitness centre project and looking to confirm which appliances/equipment we typically would have to include in this credit.

I’m modeling a project where there is an external basketball court, which is illuminated. I’m considering Table 9.4.5 “Lighting power densities for building exteriors” for the baseline model.