Hi, we are working on an office tower EBOM project and one standard review remark concerned the absence of kitchen sinks.

Table G3.1.1A states that buildings that are “…eligible for more than one baseline system type should use the predominant condition to determine the system type for the entire building except as no

We are trying to finish submitting all our credits, and I can't get the check mark for PI-1 on the scorecard to turn green.

How do you get credits for no irrigation? I do not see any automatic points or a way to calculate them.

I am on a project that is installing geothermal. The company that will be drilling the wells is planing on re-using the shale that is removed during the process.

All, We are attempting to accurately model the gas energy usage for the DHW system in a recent residential building.

In pursuit of flush out for the project, should "gross floor area" be used or "net occupiable area" for the calculations? The "FAQs for IEQc3.2" section on this page states "all occupied gross floo

This particular single family home was designed for adaptability by request of the client.

Hi, We are designing a 36,000sf addition to a 55,000sf school. This school addition will be an extension of the existing school buildings wing.

I apologize in advance for the cross posting. This is my first LEED project as a LEED AP/Building Owner and I am running into an emerging war between the architect who is not LEED accredited and a