What have you provided as a deliverable for this credit? Was it the EPA's Ready for Reuse form? Our inspecting authority is not sure what to provide to appease the LEED reviewer. Thanks-

Table G3.1 in Appendix G requires only conditioned space be simulated as being both heated and cooled in the proposed design.

Hello, I have a question regarding the requirement for a residential neighbourhood meeting a min density of 10 units per acre for Option 2 - Community Connectivity.

Is it acceptable to pursue bike storage on the premise that the secured, covered storage is the dorm/apartment.

Working on my 1st project that includes a pre-rinse spray faucet for a restaurant/cafe type setting. What should should be shown as the total daily uses and the duration on the template?

For the EAp1 form, I'm confused as to whether I am supposed to fill out this form for the design preliminary review, because this is a Construction credit? Can someone please clarify?

Does anyone know if the 'square footage of all parking areas' includes the drives as well, or is it only the parking stalls themselves?

Hi, My question is regarding the feasability of certifying a hydroelectric power plant facility under the LEED EBOM Rating System.

If we were to calculate the average flush rate of a dual flush toilet (with urinals present in the space) we use the example average flow rate equation provided by USGBC in their Appendix A water c

Our project is a 14-floor residential project. We are pursuing the prescriptive pathway for daylighting, which requires us to calculate the floor to window ratios for each room.