I am glad to have a forum like LEEDuser to ask this question, since this has mystified me for many years.

Hi, Our project is 133,624 sf.

After having registered our project (LEED NC for Schools) it was determined that the building would be constructed in two phases, one right after the other, with Phase 1 being occupied while Phase

I am a first timer at Documenting LEED credits. I am working on MR credit 5 - regional materials.

I am working on a project at a research university. We are seeking to obtain certification for a building on campus that consists of research, classroom, and office spaces.

Does anyone out there know what the following comment pertains to: Provide additional information (Mech-5C report) to verify that the Proposed Case Carrier units have been modeled at a 50% minimum

Does anyone out there know what the following comment pertains to: Provide additional information (Mech-5C report) to verify that the Proposed Case Carrier units have been modeled at a 50% minimum

Do the refrigeration system such as walk-in coolers or refrigeration cases must be detailed modeled in the simulation program (E+)? or is it possible consider them as a process loads?

Is there an M+V plan template for this credit? There is a template for the M+V 5.1 credit. Thanks, Melissa

I apologize for the simplicity of my question, but I want to make sure I am providing accurate information. If I have a commercial office building with 2 identical unisex bathrooms with no urinals