Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Off-Site Waste heat

NC-v4 EAp2:Minimum energy performance
posted by  Marcus Sheffer  on 

There were a couple of previous posts on this subject, one from an industrial process and one from a data center that were located outside the LEED project boundary.

2
Fri Sep 7, 2018, 3:07 pm
Default Avatar

who has to pay for the renewable systems?

posted by  Tatjana Ernst  on 
9
Default Avatar
kathy zarsky
Systems Director
HOLOS
LEEDuser Basic Member
15 thumbs up
Fri Sep 7, 2018, 2:56 pm
Default Avatar

Template v2009 EAp2 filling doubts

NC-2009 EAp2:Minimum Energy Performance
posted by  Luis Andrade  on 

Hello, 

3
Profile picture for user jkurtz
Jill Kurtz
Director of Building Sciences
Page
LEEDuser Premium Member
3 thumbs up
Fri Sep 7, 2018, 2:49 pm
Default Avatar

No cooling tower in design but core and shell spaces modeled as neutral with cooling tower in energy model.

Pilot-Credits WEpc94:No Cooling Tower
posted by  Chris Yates  on 

A project I am working on meets all the requirements for the design (no cooling tower, no use of the latent heat of the evaporative cooling of water, no cooling from a Dist

1
Tue Aug 25, 2020, 7:09 pm
Default Avatar

Historic District in vicinity

NC-v4 LTc3:High priority site
posted by  Timothy Hillhouse  on 

I am working on a project in a rural NC town which has a historic district in its downtown area.  Our project is downtown however the historic boundary goes around our block essentially surrou

0
Default Avatar

District or not district?

NC-v4 EAp2:Minimum energy performance
posted by  Ilaria Piong  on 

I have a building composed of two parts: a warehouse and an office.

1
Fri Sep 7, 2018, 3:59 pm
Default Avatar

Is carpet included in Low emitting material calculation?

CI-v4 EQc2:Low emitting materials
posted by  shashank gangil  on 

From the LEED v4 CI reference guide, it seems there is no mention of carpet towards low emitting material calculation.

1
Mon Dec 10, 2018, 8:20 pm
Default Avatar

Minimum of 5 material streams to be diverted

CS-v4 MRp2:Construction and demolition waste management planning
posted by  Chia WL  on 

Understand that we need at least five materials to be targeted for diversion. For our project, all C&D waste will be commingled and sent to the recycling facility for sorting and recycling.

3
Default Avatar
Chia WL
LEEDuser Basic Member
0 thumbs up
Fri Sep 7, 2018, 1:33 am
Default Avatar

90.1-2010/G versus USGBC’s residential midrise simulation guidelines

Mid-Rise-v4 EAp1:Minimum energy performance
posted by  James Love  on 

Parts of these documents seem contradictory.

1
Tue Jan 22, 2019, 7:58 am

SDL Show & Tell - Going to Greenbuild in November?

Green Commons
posted by  Jerelyn Wilson  on 

Please mark your calendars to join BuildingGreen and HKS for the 2018 Pre-Greenbuild SDL Show & Tell on Tuesday, Nov.

0