Forum quick links
Electric vehicles charging stations
NC-2009 EAp2:Minimum Energy Performanceposted by Ricardo Sá on
Dear All,
We are currently certifying an office building which includes enclosed car parks with charging stations for electric vehicles;
v4 Demand Response - No on-site Elec Generation
NC-v4 EAc4:Demand responseposted by Mark Gelfo on
In the new DR credit, it is very clear that on-site electrical generation does not count as a DR strategy.
INstalled and Planning to be installed
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Lou Niles II on
Hello I thought there was a path for counting EV charging stations that are in the plans to be installed but will be installed at a later date.
Transportation Planning Handbook NCv4 LTc7
Hospitality-NC-v4 LTc7:Reduced parking footprintposted by Tyra Sorensen on
Where do I find the information? Institute of Transportation Engineers, Transportation Planning Handbook, 3rd edition, Tables 18-2 through 18-4 The ITE website that links from the USGBC page for t
Core and Shell not for rental?
NC-v4.1 IPc1:Integrative Processposted by Victoria Rios Esteve on
Hi everyone,
LBC 3.0 Red list compliant
NC-v4.1 MRc4:Material Ingredientsposted by Allen Cornett on
I have 2 products that state they are LBC 3.0 Red list compliant. If these products meet the requirements of the USGBC Declare Compliance Graphic can LBC 3.0 Red list compliant contribut
axial fan cooling tower
NC-v4 EAp2:Minimum energy performanceposted by Francesco Passerini on
G3.1.3.11 states: “The heat rejection device shall be an axial fan cooling tower with two-speed fans, and shall meet the performance requirements of Table 6.8.1G.”
Cullet as recycled material in glass
NC-2009 MRc4:Recycled Contentposted by Mariah Grife on
I have worked on LEED v2.1 projects before where recycled content of glass was rejected due to the cullet present in recycled glass not being allowed to be counted as "pre-consumer" recycled.
Baseline Economisers
CI-v4 EAc2:Optimize energy performanceposted by Ciaran McCabe on
Can ASHRAE 90.1 - 2010 Table 6.5.1B be applied to a LEED PRM models.