Forum quick links
NC-v4.1 EAp2
NC-v4.1 EAp2:Minimum Energy Performanceposted by Takashi Hasegawa on
Hi,
Can anyone please check if my understanding is correct, which is on the relationship between LEED V.4.1 and ASHRAE90.1 2016? Below is how I understand;
SSp1 - contractor's stormwater pollution prevention inspection reports needed in a hypothetical USGBC audit?
posted by Jeff Wiedmeyer on
Has anyone had an USGBC audit experience where stormwater pollution prevention inspection reports were requested? My project was awarded LEED Gold under v2009 in the Fall of 2019 and as
Off-site Renewable/Solar Energy
CI-v4 EAp2:Minimum energy performanceposted by Rahil Shah on
Hello,
Introducing open-office plan..!!
posted by James Carvlin on
Hey,
Our company is planning for an open-plan office to encourage collaboration and to promote transparency. But we have found few drawbacks to this open-plan office because,
Renewable energy production DES Path 1
NC-v4 EAc5:Renewable energy productionposted by Lisa Loreti on
We are modeling a building connected to a DES and we decided to follow Option1 - Path1 for energy modelling.
How to cal kw/cfm
EBOM-v4.1 EAp3:Energy Performanceposted by Oatto Promsrisawat on
good morning every body as
1. I have input motor on specification 442 Watts (it include power factor or not)
2. I have cfm 1333 cfm
Single occcupant rooms for brief and silent work - thermal controls required?
CI-v4 EAc2:Optimize energy performanceposted by Andrzej Gutowski on
Dear collegues,
HVAC Load Calculation Software
posted by Sarah Gudeman on
Wondering if we can have a dialog on HVAC load calculation software...