Log in
Forum
Topic

Hi Krista

General forums
posted by Emily Catacchio on Oct 27, 2011, 9:33 am

Since it is under a separate contract I'm inclined to say no it does not need to be included. Check out this...

MERV8 = F5 and MERV13 = F7

General forums
posted by Jean Marais on Oct 28, 2011, 1:57 am

There you have it folks. It's official.

ACP for IEQ Credit 7.1:using EN 15251 + + ISO 7730 thermal comf

General forums
posted by Jean Marais on Oct 28, 2011, 2:04 am

EN 15251 + ISO 7730, combination is almost identical to ASHRAE 55...doesn't make this credit any easier.

Example L-16 Narrative

Schools-2009 IEQp3: Minimum Acoustical Performance
posted by Heather Alley on Nov 1, 2011, 4:00 pm

Does anyone have a good example of an L-16 Narrative accepted by USGBC? This is our first LEED project, both architecturally and mechanically. The Example narrative under Documentation Toolkit...

AGMBC released

General forums
posted by Tristan Roberts on Nov 2, 2011, 10:30 pm

USGBC has just released complete multiple buildings and campus guidance for LEED 2009 projects. More detail is on LEEDuser's...

LEED 2009 AGMBC

General forums
posted by Tristan Roberts on Nov 2, 2011, 10:31 pm

USGBC has just released complete multiple buildings and campus guidance for LEED 2009 projects. More detail is on LEEDuser's...

Re: Documentation hours

General forums
posted by David Posada on Nov 3, 2011, 1:46 pm

There are a few comments posted over at
http://www.leeduser.com/topic/man-hour
so give that a look and post back if you still have...

Hi Kay

General forums
posted by Emily Catacchio on Nov 3, 2011, 1:53 pm

This is a difficult question because it really depends on the project. It also depends what your role is. If you're the LEED coordinator for the project you could spend, say 120 hours. If you're...

Seated height and systems furniture

NC-2009 IEQc8.2: Daylight and views - views
posted by Susan G. Drew on Nov 7, 2011, 12:27 pm

Given that systems furniture is now included in the calculation scope for IEQ8.2, does using industry-standard 42" high panels qualify as a 42" high line of sight?
And, if higher panels are...

LEED-ND forum

General forums
posted by Tristan Roberts on Nov 13, 2011, 12:48 am

LEEDuser now as a single forum devoted to LEED-ND -- please post your LEED-ND questions and comments there. Thanks!