Forum quick links
Grouts
NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Bruce Maine on
Can someone tell me where 1168 or 1113 references "grout" for IAQ VOC requirements.
Vacant Space FTE User Group
EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by Kelly Witosky on
We are working on a project that has completed the Preliminary Review Phase of Certification, this is a high-rise office building located in an urban area, with occupancy that fluctuated over the p
When is the normal period to submit for design review phase?
posted by Yuthdanai Somjitchob on
We have been working on our first LEED project in Thailand. We have been involved in the project since the beginning.
Is Reused Wood Flooring Required to be Certified?
CI-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Nina Tallering on
Is reclaimed wood flooring required to be certified? Similar to EAc1.4 and MRc7, I would assume reused products would be exempt but I have not found a reference for this.
LEED CI 2009 states:
Project
CI-2009 EAc1.1:Optimize Energy Performance—Lighting Powerposted by Michelle Bracewell-Musson on
LEED CI 2009 states: Project teams in California may use Title 24-2005, Part 6 in place of ANSI/ASHRAE/IESNA Standard 90.1-2007. I searched for recent addenda or updates and there aren't any statin
Daylight Simulation at 9am and 3pm
NC-2009 IEQc8.1:Daylight and Views—Daylightposted by Maya Karkour on
Hi all, The requirements in the guidance state: "Calculate the daylight illumination for each applicable space using the following daylight criterion: Clear sky conditions at both 9:00am and 3:0