Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Residential Bath Lavs

NC-2009 WEc3:Water Use Reduction
posted by  Jeremy Kuhre  on 

Does anyone have experience with using a 1 gpm aerator in a residential setting? We typically use 0.5 gpm aerators in commercial settings which has worked fine.

2
Sustainability Coordinator
Webcor Builders
LEEDuser Basic Member
40 thumbs up
Mon Mar 12, 2012, 8:09 pm

Avoidance of Chemicals of Concern Credit

General forums
posted by  Anne Less  on 

Yikes! I spy what I hope is a MAJOR typo in this credit language.

3
Policy Director
Healthy Building Network
LEEDuser Basic Member
117 thumbs up
Fri Mar 9, 2012, 10:45 pm

Prerequisites in Master Site

LEED Guidance for Campuses and Multiple Buildings
posted by  Omer Moltay  on 

We are using the campus approach for a mixed used development. None of the prerequisites will be applied under the master site.

3
Technical Customer Service Specialist
GBCI
LEEDuser Premium Member
105 thumbs up
Fri Mar 9, 2012, 10:42 pm

Health Faucet

CI-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Green BSL  on 

Hellow, Shall we consider Health Faucet provided in restroom for LEED CI Calculation in WEp1.0 & WEc1.0?

3
Default Avatar
Blue Star Ltd
LEEDuser Basic Member
4 thumbs up
Fri Mar 9, 2012, 6:55 pm

Building Envelope Compliance

CI-2009 EAp2:Minimum Energy Performance
posted by  Omar Delgado  on 

Greetings, We're doing a CI project where the glazing far surpasses the 40% wall area allowed on the north wall. However, the envelope will not be altered for this project.

3
President
REAL Building Consultants
LEEDuser Premium Member
27 thumbs up
Thu Mar 8, 2012, 6:33 pm

Entry Way Systems: Floor mats

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Elle Brown  on 

I am working on a government project and half of our building is a garage space. 1. Do we have to put 10 ft long floor mats at each exterior door to the garage?

2
Sustainability Specialist
Wight and Company
LEEDuser Basic Member
415 thumbs up
Thu Mar 8, 2012, 2:42 pm

manufacturing plant: group certification or single structure?

LEED Guidance for Campuses and Multiple Buildings
posted by  Jutta Berns  on 

i probably know the answer already, but i just want to test my understanding: we are in the process of registering a manufacturing plant (BD+C), which consists of an office building and a manufac

2
Sustainability Specialist
Wight and Company
LEEDuser Basic Member
415 thumbs up
Thu Mar 8, 2012, 5:55 am

Energy Star Equipment and Timing

CI-2009 EAp2:Minimum Energy Performance
posted by  Curt Pascoe  on 

I'm bringing up a topic discussed but not solved in previous comments. What does the USGBC include in "equipment installed as part of the tenant's scope of work"?

5
Thu Mar 8, 2012, 4:09 am

Defer Credits

General forums
posted by  Emily Catacchio  on 

Dana,

I recently recieved this response from GBCI:

2
Default Avatar
Architectural Project Coordinator
Crabtree, Rohrbaugh & Associates
LEEDuser Basic Member
1 thumbs up
Thu Mar 8, 2012, 3:49 am

Defining usage groups for tenant scope fixtures.

CS-2009 WEp1:Water Use Reduction
posted by  Luis Miguel Diazgranados  on 

Hi everyone, I'm working on an office building in which efficient bathrooms will be installed as part of the Core and Shell scope.

2
Architect / LEED AP BD+C
KILTIK Consultoría
LEEDuser Basic Member
36 thumbs up
Wed Mar 7, 2012, 5:50 pm