Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Site disturbance from a project surrounded on all four sides

NC-2009 SSc5.1:Site Development—Protect or Restore Habitat
posted by  Achelles DSouza  on 

I am working on a project which is surrounded by existing facilities on three sides, and road on the fourth side.

3
Default Avatar
Achelles DSouza
Sustainability Engineer
Freelance Building Simulator
LEEDuser Basic Member
7 thumbs up
Wed Apr 4, 2012, 5:38 pm
Default Avatar

Views and window coverings

CI-2009 IEQc8.2:Daylight and Views—Views for Seated Spaces
posted by  Nancy Goshow  on 

Can you still achieve the views credit if you have a commercial interiors space meeting all of the requirements of the credit except that due to security purposes the horizontal blinds need to be

2
Profile picture for user treed74
TODD REED
Energy Program Specialist
PA DMVA
LEEDuser Expert
626 thumbs up
Wed Apr 4, 2012, 2:52 pm

Underground Parking and IEQ 4

NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Ibrahim El-Shair  on 

What are possible conditions to enable excluding underground parking from calculations of IEQ 4 - Low emmiting materials? if we have 3 underground levels of parking and they have the following con

5
Profile picture for user Ibrahim
Ibrahim El-Shair
LEED Construction Coordinator, Sustainability Professional
DAR
LEEDuser Basic Member
4 thumbs up
Tue Apr 3, 2012, 4:23 pm

Paint on the inside of pipes

NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by  Emmanuel Pauwels  on 

Our project has a district heating and cooling system. The inside of the pipes that connect the building with the district heating and cooling system have a paint.

2
Profile picture for user Ibrahim
Ibrahim El-Shair
LEED Construction Coordinator, Sustainability Professional
DAR
LEEDuser Basic Member
4 thumbs up
Tue Apr 3, 2012, 4:17 pm
Default Avatar

EAc4 and district heating

CS-2009 EAc4:Enhanced Refrigerant Management
posted by  Magnus Stagnäs  on 

Our project building will we connected to a large-scale city district heating network.

3
Default Avatar
Magnus Stagnäs
Life Cycle Engineer
Finnmap Consulting Oy
LEEDuser Basic Member
22 thumbs up
Tue Apr 3, 2012, 3:06 pm

Toner-less copiers

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Elizabeth Powers  on 

Would copiers (Xerox ColorQube 9303, specifically) that don't use toner but solid ink technology need to be kept in exhausted rooms, per IEQc5? This question assumes they are high-volume copiers.

2
Profile picture for user dconnelly
Dylan Connelly
Mechanical Engineer
Integral Group
LEEDuser Expert
342 thumbs up
Tue Apr 3, 2012, 2:27 pm

CFC-Refrigerant Submittals

posted by  Chris Munn  on 
6
Default Avatar
Austin Evans
Temporary Worker
Scroll Compressors LLC
LEEDuser Basic Member
38 thumbs up
Tue Apr 3, 2012, 1:14 am
Default Avatar

Vegetation surpassing the LEED Boundary

CS-2009 WEc1:Water Efficient Landscaping
posted by  Gabriela Hernández Castillo  on 

We have a greenroof that is partially within the LEED Boundary.

2
Mon Apr 2, 2012, 3:43 pm
Default Avatar

Wood Ceiling Panels

Schools-2009 IEQc4.6:Low-Emitting Materials—Ceiling and Wall Systems
posted by  Cheryl Burkinshaw  on 

We are looking over LEED data for flat veneered wood ceiling panels, and we're unsure if it needs to meet both 4.4 and 4.6, or if meeing IEQc4.4 is enough to ensure that it's compliant with 4.6.

3
Mon Apr 2, 2012, 1:59 pm

Virtual vs Scaled CEP modeling for LEED EAc1

NC-2009 EAc1:Optimize Energy Performance
posted by  Larry Jones  on 

Hi all, We are modeling a new construction hospital whose cooling loads are met by 3 onsite 1350 ton chillers.

2
Mon Apr 2, 2012, 6:18 am