| Topic | Recent |
|---|---|
Off-site labor costsNC-2009 MRc4: Recycled Contentposted by Mara Baum on Feb 5, 2010, 9:23 pm
To what extent is shop labor included in material costs? With increases in shop fabrication, this could be a big issue. Clearly there is labor that goes into the manufacture of every product,... Last reply: Nadav Malin, Feb 6, 2010, 9:44 am |
|
Interior Light Leak Reduction- High Bay WarehouseNC-2009 SSc8: Light Pollution Reductionposted by Dan Prows on Feb 5, 2010, 3:51 pm
Hello all, Regarding light leaking from a high... |
|
Commercial InteriorsGeneral forumsposted by Sarah Brede on Feb 5, 2010, 1:02 pm
That thread is for New Construction, I am working on a Commercial Interiors project. My beef is that most of the other paths in this credit talk about "the existing" whatever (site drainage,... |
|
getting dataGeneral forumsposted by Tristan Roberts on Feb 5, 2010, 12:41 pm
Yeah, this can be a tough one. First I would check a reference such as the LEED Reference Guide for BD&C for typical... |
|
New technology not eligible for ID pointGeneral forumsposted by Tristan Roberts on Feb 4, 2010, 9:33 am
Good question, but I think you'll find that this approach is not accepted by USGBC/... |
|
VOC Budget Method saved the day!General forumsposted by Andrea Anderson on Feb 3, 2010, 5:36 pm
I just ran into this problem on a project. One of the anti-corrosive primers was well above the... |
|
Fees?General forumsposted by Dave Intner on Feb 3, 2010, 5:19 pm
"Fees and turn-around times associated with submitting these inquiries is to be determined." ... Hopefully they don't get too hog-wild with the fees on this. We've already all shelled out 150... |
|
Off Site Renewable EnergyEBOM-2009 EAc4: On-Site and Off-Site Renewable Energyposted by Reynaldo Castro on Jan 9, 2010, 3:23 am
According to LEED-EBOM... Last reply: Lana Malone, Feb 3, 2010, 4:01 pm |
|
Dark Sky CalcsNC-2009 SSc8: Light Pollution Reductionposted by Lawrence Lile on Feb 3, 2010, 3:21 pm
If you've got full cutoff fixtures you are usually set. However, if you have a situation like we had earlier, with some angled spotlights, you've got a problem. We actually took IES data and... |
|
Calculating FTE/Transients for Hospital environmentsNC-2009 WEc3: Water Use Reductionposted by Lauren Sparandara on Feb 1, 2010, 2:53 pm
I was wondering if the USGBC has provided any guidance regarding calculating the... Last reply: Mara Baum, Feb 3, 2010, 3:07 pm |
