We are attempting IEQ 8.2 for LEED CI. Would a 49" tall frosted glass panel partition comply with the intent of this credit?

Our project boundary is limited to building only excluding land area. One problem is..waste collection area is installed outside.

For anyone who is interested, here is a blurb explaining what's new in the 4th edition of the ITE guide:

I've heard that the location should be taken from where the steel in formed (manfactured) to determine the milage for Regional Materials since it is difficult to document the extraction location.

Friends-- I'd like to start a bit of a straw polling process here predicated on the idea that delaying the ballot significantly (6 months or more) is in the best interests of USGBC, LEED and the en

Hello, We have a situation where we are attempting to model a highrise building of approximately 450,000 square feet. The predominant use of this building is residential.

do the spaces,zones and air systems in the baseline should have the same names as in the proposed design and the ones in the upploaded drawings? in the mechanical equipments schedules the engineer

is the electrical rooms and internal swimming pools cooling is considered as a process load or not? and what leed reviewer should see in the energy model output. regards