On the Reduction Calculation spreadsheet, how should the "Percent of Occupants" be filled out for kitchen sinks or urinals? The spreadsheet indicates that the percentage should be 100% if...

Greetings,
In the project we are modeling, the Proposed design has applied a chiller’s condenser heat recovery without this to be required by the prescriptive requirement (6.5.6.2).
...

Hello,
I am modeling a bulding where wine is made (don´t know how to say it in English, sorry),
the thing is that there are many spaces in the project that have...

I am working on a industrial project registered in Existing building Operation and maintenance located Out of US , that have its own electricity production of 4 Mw through gas engines and its...

Hi -

We are working on an interior commercial fit out project in a...

For a facilities with increased process load (more than 60%), other than data centers, including but not limited to industrial facilities, is there a particular guidance in establishing a...

Is "v2009v4_Minimum...

The building I am trying to obtain the certification for, is a museum. It has two rooms with faucets for the cleaning staff. Are these faucets into the objetive of reduction?
Additionally,...

Hello - how do i calculate the baseline parking capacity of an airport ? - it is not included in the TABLE 1 - Base Ratios for parking spaces, by building type.

I am working on a 9 storey office building (8 levels of office and 1 basement level). The building has a total floor area of 9,400m2. The space heating and cooling will be provided by means of a...