Reducing process loads of all types should be a LEED insentive credit wize, but is often pushed back due to the difficalties documenting the exceptions to ASHRAE 90.1 Appx. G for differing...

Katie,
In case you haven't seen it yet, the Minimum Program Requirements (MPR) Supplemental Guidance document provides some help here:

1. The LEED project boundary must include all...

This is great, because it will not only maximise the potential of creating greener buildings using LEED as the guide, but also solve so many problems and headaches during the LEED certification...

Apologies! I meant to add that the ND launch is expected in late spring. Unfortunately, there isn't a firm date yet, but we're working hard to make it happen as soon as possible. If you're part...

these should be released at launch

The dates that are required for this credit are very confusing. For Option B "practices must have started before the start of manufacturing but no earlier than 24 months prior to the last...

According to the calculation showed at document WATER USE REDUCTION - ADDITIONAL GUIDANCE v011209, the average flow rate is defined by:

[(Male full-flush uses/day×full-flush rate)+(Female...

Has anyone ever heard of a project achieving this credit with an exclusion of certain...

My question is about retail space and EAp2/EAc1. According to page xxiii of the Reference Guide, up to 10% of the floor area can be exempted from all credits (except EQp2) for multitenant...

Hi Kash, welcome to LEEDuser—it's good to have you!
It's probably best to think of LEED-...