Along the project boundary perimeter, where streets or non-motorized-rights-of-way do not intercept, there are some vegetation.

LEED HC allows for the inclusion of 5% of DGSF as shelled space. How does this reconcile with MPR #2 'must be a whole building'?

Does anyone know of an exception to the MERV 6 filtration requirement of ASHRAE 62.1 if equipment is incapable of housing a MERV 6 rated filter?

I have a school that is approximately 180,000 sqft. I'm able to take exceptions for a large gym that is approximately 40,000 sqft and use PSZ in this area.

Has anyone calculated or have access to the R 404A maximum refrigerant charge as provided for some other refrigerants in Table 2 on Page 310 of the BD+C Reference Guide?

I am an architect who has been building super sustainable houses since well before LEED existed.

The credit requirements do not clearly state that one cannot count multiple stops for the same route.

I would to know if there is any variation in the limit of VOC emissions from paints allowed, if this painting is located in ventilated spaces such as courtyards, or in spaces with temporary occupat

We are working in project within a universitary campus.

I can understand being a little disappointed by this change, but come on, get real.