Hi all, We’re working on an EBOM Project in Finland (Educational Building) and are about to fill in the Case 2 Calculator for EAp1 (Option1 Tab).

Hi, I would like to know if water faucets, showers, and WCs are considered as toilet accessories under CSI division 10 or should they be considered MEP equipment and be excluded from MRc 4 and 5 ca

Does regularly used exterior entrances means that you can ignore all other entrances except the main entrance to the building? If not, what kind of entrances should meet the credit?

Unless USGBC has a different interpretation with regards to wash fountains , we may not be able to get points on water conservation because the wash fountains (Bldg 3) uses 3 gpm.

I have not come across this situation before, but the Carpet for our entire building has already been purchased by the Owner.

I have restrooms in the building I am certifying, an also restrooms with showers in a 40sqm building inside my project boundary.

Could someone help me to guess what LEED product type corresponds a "Paint composed of aliphatic polyurethane resins solvent, mineral fillers and pigments"? Thanks a lot!!

Hi all, In our project, there will be a tenant lease agreement so that the Lighting Power density with which they design the office spaces should be below 9 W/m2 (lower than the base requirement u

Hi: We are working in a project in Lima Perú and the HVAC Engineer has just sent to us a submittal sheet of a Magnetic Chiller with a COP of 10,8.