As a specifier, applying the Cal DPH standards can be like shooting in the dark. Mapei, (IEQ 4.1 for example,) doesn't specifically tell you which products comply with the CAL DPH standards but...

I was reviewing the LEED addenda and noticed an interesting one for this credit. As of 5/11, "...

In MPR, all LEED certified project must commit to sharing with USGBC and/or...

Dear all,

We are modelling an office tower under LEED C&S 2009. The owner is NOT fitting out the offices of each floor (They are within the tenants' premises).

One of the energy...

Fantastic recap and excellent points on these "real time" issues. I was just having this very discussion with a prominent, and very green, infill developer. Many of their projects are...

I have a question regarding building-height-to-street-width ratio. ND says that street width is measured facade to facade, but what if the development is not set up with buildings directly...

ago. My understanding that an on/off was sufficient but I have heard otherwise from others on this forum. Good luck! Log in or register to post comments ...

Hi all!
I'm working on a project which seeks LEED CS for the...

Wondering how the IEQp1 form should be filled out for a project that will not have any ventilation upon initial completetion. We do know that the future tenants will have both office and...

Hello friends,

Anyone have the feedback of USGBC where equipment are ranked VRV / VRF to require minimum efficiencies ASHRAE Standard 90.1-2007 according in LEED 2009, or someone has this...