We are working on a project where the total project has five towers on one podium. We are certifying only one tower for LEED-NC with an area of 34152 sq.m.

Hello, One of the LEED requirements of this credit is: "[For rooms with chemicals / hazardous gases], the exhaust rate must be at least 0.50 CFM per sq. ft.

The GBCI has decided that net-zero projects must buy additional EAc6 green power if the actual energy use for two-years post-occupancy does not match the GBCI approved results from EAc1/EAc2.

Can I calculate the green roofs over an underground parking garage? (I calculated them as part of the landscape for SS CR 7.1-non roof) Thanks

As i checked online submittal template, it seems that we only have to mark the check box, do we have to need to submitt any documentation for the requirements mentioned in this credit.

We are modeling a new LEED school building that is an addition of an existing complex buildings. The simulation was made using HAP.

i heard that LEED V.4 is on the way. i am planning to take LEED AP (BD+C) exams in end of September? since LEED V4 is coming will there be changes to the scope of the exam?

The LEED online V3 form of MR Cr 4 requires to type item by item sustainable materials on the form while V4 form requires only to upload material calculator worksheet and then type the total cost

I have two questions that may seem nitpicky, but are relevant to achieving this credit.

We have large warehouse project that also has a green house as a part of the building. could this area be excluded from daylighting?