Log in
Forum
Topic

Hangar

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Gustavo De las Heras Izquierdo on Nov 5, 2015, 4:56 pm

My project is a 93,000 sf open-plan hangar. We are designing grills on walls that count for 4% of the floor area on 2 opposite facades to induce crossed-ventilation. Has anyone tried this...

Last reply: Gustavo De las Heras Izquierdo, Dec 21, 2015, 8:09 pm

Modeling additions and alterations

NC-2009 EAp2: Minimum Energy Performance
posted by Cory Duggin on Nov 6, 2015, 2:05 pm

Table G3.1 section 2 a says one of the requirements to exclude parts from the model is that "Work to be performed in excluded parts of the building shall meet the requirements of Sections 5-10...

Last reply: Marcus Sheffer, Nov 6, 2015, 4:09 pm

Preferred parking spaces definition interpretation

NC-2009 SSc4.3: Alternative transportation - low-emitting and fuel-efficient vehicles
posted by Ricardo Sá on Nov 12, 2015, 11:20 am

The definition of preferred parking refers "designated spaces close to the building (...), designated covered spaces (...)". Does this mean that parking spaces designated for low-emitting that...

Last reply: Helen Kessler, Nov 17, 2015, 2:24 pm

Green Cleaning

CI-2009 IDc1: Innovation in Design
posted by H. Group on Nov 12, 2015, 5:04 pm

Credit 1.1 - How can i obtain point for Green Cleaning? What do i need to provide?

thank you

Last reply: Helen Kessler, Mar 27, 2017, 11:09 am

Renovation and New Construction

NC-2009 EAp2: Minimum Energy Performance
posted by CT G on Nov 23, 2015, 5:25 pm

Hi all,
we are working in a project with 61.8% of the floor area for renovation and 38.1% is new construction. Our cost savings is 9.43% but the EAp2 form does not allow us to check...

Last reply: Haojie Wang, Dec 3, 2015, 11:51 am

What is to be considered LID + measures outside LEED Site

NC-v4 SSc4: Rainwater management
posted by Petr Vogel on Nov 24, 2015, 8:48 am

Dear all,
we have a project site situated in the rural mountains where...

Last reply: Petr Vogel, Nov 30, 2015, 2:55 pm

System Furniture Include or Excluude?

CI-2009 IEQc8.1: Daylight and views - daylight
posted by Alain Brierley on Nov 30, 2015, 2:41 pm

I am working on a large 12 story office building that has a 12 story toplite open atrium requiring the credit be documented using option 1. A number of the floors have large open office areas...

Last reply: TODD REED, Apr 19, 2017, 12:31 pm

Insulation between 2 slabs

NC-v4 EQc2: Low-emitting materials
posted by Elodie DUMAS on Dec 3, 2015, 1:56 pm

Hi,
We have several interior spaces where insulation is between two concrete slabs.
Do you think we really have to consider this insulation, because it won't be in contact with...

Last reply: Jon Clifford, Dec 7, 2015, 9:34 pm

Detailed LEED certification process

LEED Reviews: Appeals, Design/Construction Submittals, and more
posted by T J on Dec 9, 2015, 1:21 am

for LEED review. Joining LEEDUser or similar forums is a good place to get basic knowledge, and the GBCI is very good about answering more detailed questions via the "Feedback" option on the LEED...

Last reply: RETIRED, Dec 14, 2015, 9:57 am

Definitions relating to Credit EA 3

CI-2009 EAc3: Measurement and Verification
posted by Ciaran McCabe on Dec 9, 2015, 10:56 am

Where this credit is sought under commercial interiors, yet the landlord systems do not have all the metering points, would the tenant be expected to provide landlord metering in order to seek...

Last reply: Marcus Sheffer, Dec 9, 2015, 12:03 pm