As noted above the requirement is applicable to "All adhesives and...

Hello

I am having a lot of trouble getting a total material cost from the contractor. Is there any good/easy/quick strategy to get this number? How is this typically calculated by the...

I've noticed that the LEED reference guide says "Furniture is considered part of the scope if it is installed at the time of occupancy, regardless of who specified or provided it." And I've...

We have a building that consists of new, renovated and unrenovated area. We are using builidng area method for lighting power...

I have a project that will be conditioned by a water-cooled chiller and boiler plant located in one of the building that will be rated. It also provides chilled and hot water to another building...

Our project building is 75% existing and 25% new construction. When the credit form calculates the EAc1 points, it is done based on a weighted average, which makes sense. What I cannot tell is if...

We recently received comments back on this credit, stating that although we had provided the area required, "it does not appear that the areas indicated to be places of respite meet the...

We're designing an office building that the owner wants to provide flexibility in leasing, such that tenants can rent certain spaces in the floor, whole floors, or the whole building. The owner...

Hi, has anyone has success with noting the carpool stalls are only used during certain hours of the day (like during typical office hours)? We have a large garage that is being used by several...

Hi Markus and colleagues,
If in the Proposed building the total interior lighting power (space by space method) is bigger than those of the Baseline, is this acceptable. The exterior...