Hi there. We have a client that has 6 projects of buildings to be constructed at different location. But all this 6 projects are the same.

Does anyone have any experience submitting for EAc2 as part of a Master Site? Our project is a campus project that will contain three buildings.

Our project is a one story learning/conference center. In this case is the gross square footage the same as the building footprint?

Does anyone have advice for a building where we are unable to find the drawings which specify the Design CFM for some of the exhaust fans?

We will start a residential project (more then 4 stories) The client is a developer who will sell and rent out the appartments.

Hej! As there is a baseline for data centers (tool developed in excel), is there also a similar document or any guideline for hospitals?

Hi to all: We are modeling a data center under LEED v2009, but we need to show savings in the process loads (servers, UPS and transformers) since the achieved savings in HVAC and lighting systems

We are facing a complicated CHW distribution in one of our energy model, we have 2 chillers feeding a constant flow primary loop that serve heat exchangers. From the heat exchangers start several

There's been a lot of talk recently about the auto-control / metering faucet requirement in LEED via the "Water Use Reduction Additional Guidance" document.

Dishwashers should not be included in the form correct?