Do you have any guidance on how to treat servers and other network equipment? From what I can tell, the EPA introduced the ENERGY STAR for servers in 2009, but few units have been rated thus far...

How should a ready mixed drywall joint compound be treated for the purposed of EQc4.1 and/or EQc4.2? Is it classified as an Architectural Sealant by...

Hi, my question is as follows: in version 2.2 when you chose to use the complience forms to support the mandatory provisions, only the check list part was necessary to be filled up. Since the V 3...

I understand if a transient is coming one hour per day like the example above, but what if they are only coming once a week and working 8 hours? How is that calculated?

And does two...

Can anyone offer any guidance on how to assess whether or not homemade cleaning products can comply?

For instance, in a building where all cleaning products are chemical-free and made from...

During design review, request for additional information on actual installed materials.

I upload the specification section showing requirement for...

How do you enter a variable flow shower head in the template?

The American Standard flowise 3 function showerhead is a great example:

3 spray settings:
- Turbine spray at 1....

We have a paved walking surface (concrete pavers-low...

Hi all,

We are performing a LEED 2009 NC assessment for a 42-story high rise residential building. Each apartment has several balconies. Can we consider all these private balconies to be "...

Here, by the looks of it, no RATE calculations are required.

Just VOLUME...and only for the 2-year 24hr design storm to boot, meaning:

1) Get the total volume ("Depth") of the 2-...