Forum discussion
NC-2009 SSc6.1: Stormwater Design—Quantity Control
Michael DeVuono,
I've digged through both forum 6.1 and 6.2 but didn't found international data for Design Storm. I am doing a project in Russia. We have sites with existing imperviousness 50% or less and need this data for SSc6.1-1 and SSc6.1-2.
Thank you for halping.
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Why do the requirements focus on 1-year and 2-year, 24-hour storms?
How can green roofs count as a stormwater control measure?
I have 100-year data—how do I convert to 2-year?
Are there special considerations for international projects?
What performance threshold do I need to achieve for an Exemplary Performance point?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11478 thumbs up
February 25, 2013 - 3:26 pm
Liubov, there are several good resources posted in the Resources tab above that should help. (You'll need to log on as a paid member to access this and other LEEDuser, guidance, though.)
Francesco Allaix
MrL Arkkitehdit
19 thumbs up
April 1, 2014 - 4:10 am
Tristan,
I've checked all the Resources but cannot find any link regarding 1 and 2 year 24h design storm values outside USA (there are several for Oregon, Maryland, Colorado, etc). Could you point at a link or report for Europe or Russia?
Liubov did you find any information for Russia?
We have projects in Europe and Russia and this is currently such a tricky credit to fulfill, but only because of the specific regulations...
Thanks!