Topic | Recent |
---|---|
Enter way/Filling out the FormCI-2009 IEQc5: Indoor Chemical and Pollutant Source Controlposted by Bridgett Weaver on Apr 27, 2015, 12:54 pm
Working on a project that the occupancy of the building is a multi-tenant. Would the project still be able to receive this credit, if the entryway / walk off mats are not apart of the project... Last reply: Michelle Halle Stern, Apr 30, 2015, 10:50 am |
|
Commingled Waste DiversionEBOM-2009 MRc9: Solid waste management - facility alterations and additionsposted by Michelle Rosenberger on Apr 27, 2015, 1:16 pm
I see nothing in this credit that discusses commingled diversion methodologies or requires monthly diversion rate backup from facilities like the NC rating system. Does this credit like LEED for... Last reply: Michelle Rosenberger, Apr 27, 2015, 6:32 pm |
|
conductive rubber flooringNC-2009 IEQc4.3: Low-emitting materials - flooring systemsposted by Lyle Axelarris on Apr 30, 2015, 2:43 pm
In the past, we've used FloorScore-certified Static Dissipative rubber Tiling for Comm rooms. The client is now asking for conductive rubber flooring instead of dissipative. The proposed... Last reply: Lyle Axelarris, Apr 14, 2016, 9:31 pm |
|
Drain Water Heat Recovery SystemNC-2009 EAp2: Minimum Energy Performanceposted by Luis Barros on Apr 30, 2015, 4:03 pm
A client wants to utilize our Zypho Drain Water Heat recovery system for a hospitality project. The client wants to confirm the availability of LEED credits. My understanding is that while the... Last reply: Jean Marais, May 4, 2015, 9:41 am |
|
EAc5 Option 3NC-2009 EAc5: Measurement and Verificationposted by Sheryl Swartzle on May 18, 2015, 2:39 pm
Our client chose Option 2 on the PIf1 and the form has been approved. They have decided to pursue the 1 point available in EAc5 for choosing Option 1 in PIf1. Is it acceptable to update PIf1... Last reply: Sheryl Swartzle, May 18, 2015, 3:34 pm |
|
Rated powerCI-2009 EAp2: Minimum Energy Performanceposted by Yaser Al Sharif on May 19, 2015, 10:45 am
From where can i take rated power for equipments like laptop , i read it on laptop about 55wh then i divded it by work hours give me 6.7watt , is that right ?????? Last reply: Marcus Sheffer, May 20, 2015, 12:51 pm |
|
EAp2-4: Energy Star equipment: conversion from kWa to WattsCI-2009 EAp2: Minimum Energy Performanceposted by Sarah Simchuk on May 19, 2015, 6:01 pm
I'm attempting to register the energy star equipment for my project under Table EAp2-4. The table asks for... Last reply: Marcus Sheffer, May 20, 2015, 2:14 pm |
|
n/aNC-2009 IEQp1: Minimum indoor air quality performanceposted by Stella Stella on May 24, 2015, 8:47 pm
Hi All, Last reply: Stella Stella, May 28, 2015, 9:24 pm |
|
DES Option 2 – CHP with absorption chillerNC-2009 EAc1: Optimize Energy Performanceposted by Qian Tang on Jan 9, 2015, 4:10 am
Hello, Last reply: Qian Tang, Feb 2, 2015, 5:47 am |
|
Modeling Water-source Variable Refrigerant Volume SystemsNC-2009 EAp2: Minimum Energy Performanceposted by Eric Webber on Jan 12, 2015, 5:20 pm
Hey everyone, I have a question about the best software choice and modeling strategy for water-source VRV (or VRF) systems. Our proposed design will use a water-source variable... Last reply: Anthony Hardman, Jan 30, 2015, 10:59 am |