Is it a mandatory requirement to install a domestic hot water system in a LEED project?

Hello, I have a question regarding project of office building in Prague( LEED 2009 CS). I didnt find anywhere how to add into WE Cr.3 LEED ON-LINE Form the amount of rainwater used for flushing to

Our project is an addition to an existing building.

Hi All, is there a discrepancy between the credit language and the leedonline form for IEQc8.2 - Views for Inpatients? 1- if we refer to the leedonline form, % of inpatient perimeter area with acce

We're trying to parse out items between MRc3 and 5 and aren't totally sure about how to handle the following items.

Hallo, I would like to know if AISI 307 stainless steel meets the credit requirements. Apparently, this type of steel is widely used in medical furnishings, particularly for workstations and chairs

Hello, I would like to know if a lactation room in an office building would be excluded in the calculation, due to privacy issues for this type of space. Thank you.

My city has an ordinance that there is no smoking within 20' of outside doors on City property. This is a City-owned facility and that is the rule that is enforced by management.

90.1 AppG G3.1.2.8 says the return/relief fan should be sized for max (SA-OA, 90%*SA) [cfm]. But in table 1.4. the allowable fan power is only based on the supply fan power.

For an existing building undergoing major renovation how should the existing water fixtures be handled as far as WE prerequisite is concerned?