Hi, I am modeling a laboratory which has a small area of office space for LEED and wanted to check a couple of approaches: 1) The engineers have informed me that the lab has to be a once through sy

Can anyone advise how I should go about running the energy model for a building whose supply air & outside air quantities are being driven not by actual load, but by Unified facilities Criteria

If we convert district steam to hot water for space heating, is there any guideline on the efficiency (of heat exchanger) for baseline model?

Dear all, Does auditorium seating fall under furniture category ? If yes, had we include it for calculation or it is optional ?

In reference to postings dated 10/23/13 by Steve Keppler and Hernando Miranda, the response did not take into consideration the LEED Interpretation #10250 dated 4/1/13 stating that composite wood p

We are in the very early stages of a project that is considering LEED certification. Demarcation is still unclear, but it the client is interested in all options.

We have a project built right next to a shopping center. The shoppping center has more than the 10 basic services inside. WoIuld those 10 sevices qualify?

Based upon G3.1.10 (d) “Where no cooling system exists or no cooling system has been specified, the cooling system shall be identical to the system modeled in the baseline building” Does this mean

Hi Everyone, Regarding one of the FAQ's above in the birds eye view section with regards to gender ratio.

According to the Healthcare reference guide under MRc5 Section 8 Examples: "furniture that meets the criteria for more than one option can be counted twice".