Hello! We have a canteen project in Shanghai. The building has three floors, total GFA is 64,067 square feet. The baseline HVAC system type is system 6.

Hi All, I am working on a Core and Shell project, we know who the tenant is and we are looking to draft a legally binding document to ensure that they will install a specific building system. My qu

I'm working on a CI project where a 1000 gal storage tank will be set up for the collection of water from the cooling tower. We are not taking credit for it in our WEc1 Waste Water Credit.

We are using the vrf system on a project. Should i put as type of equipment Split AC or should i chose the "others" option?

Does anybody have experience using an alternate compliance path for a project in a cold climate?

Currently we have no smoking signs on the residence hall's main entrances, the ones used by residents to get in and out of the building.

For LEED CI - this may be so obvious and that is why it is not actually stated anywhere - but I'm assuming that FTE's are calculated based on your LEED boundary, and excludes the rest of the buildi

I have a project that is on a 50 acre site that will be all developed. The project will have (7) structures on the site.

In our Healthcare project, there are workers during the morning, afternoon and evening, with a time of 8 hours each. if I count the FTE, I get a total of workers greater to the number of workstati

We have a project that has a washer & dryer in the corner of a building services room, for periodic/sporadic use.