The table MRp2-2, is this for HPS lamps for the entire project or for the interior only?

Hey All, This question is basically for the energy modelers out there who use HAP or any other software. I have a conditioned lobby where the fan coil just uses the return air, according to our ca

I have a project using Injected foam insulation with 0 g/L VOCs. Does this product meet the credit intent? Or must it meet the specific CDHS testing requirements?

We have a large scale international project, consists of five attached building blocks (A-B-B1-B2-C) that share 7 basement and 7 ground up floors but each have different amount of total floor level

We have a large scale international project in the eastern Europe.

Hello, I have a LEED EBOM project in Thailand. I am now dealing with EA c.4 - On site or Off site Renewable Energy.

My project has apartments and penthouses on the top. Engineers design VRF with thermostat and residents can control their comfort thermally.

We registered our school project (2 Buildings) as a Group Project under the LEED for School v2009 rating system. The owner & operator are now talking about splitting the project into 2 phases

I am working on a Core & Shell LEED 2009 project and am wondering if for the energy simulation model on the proposed building versus the baseline, should we only include the shared common space

This credit calls for a minimum of 2 bus lines to have one or more stops within a 1/4 mile walking distance of the project.