Hello all, We are working on an industrial facility project were the wastewater treatment plant is offsite the project.

If a new building will be served by an existing chiller plant that already serves an existing building, does the Plant design for the Proposed Alternative need to model the full chiller size, even

IF the manufacturer's location is within 500 miles however fabricator's location is not, does it still have contribution to this credit OR not? In another word, when manufacturer location is withi

Hi all, I have a project CS LEED v4 and I couldn't found a table 1.4 with the new 90.1-2010 Standard on the LEED website. I have read that I can present the table 1.4 based on 90.1-2007 standard

Could we get a confirmation on whether the utility release form is still applicable?

Hi, To achieve this credit for our project, providing a shuttle service is the only way. I have a couple of question regarding the same: 1.

Can this be located inside a building as long as it is within 100' of the main entrance?

We are semi-new to the LEED program and want to be sure that we are following all of the necessary guidelines to achieve the overall credits for the project.

Has anyone used/documented the LEED for Healthcare SSc9 "Places of Respite" credit as an ID credit in the LEED for Schools rating system?

Here's one I haven't seen and would love for people to weigh in on. A manufacturer of, let's say paint, has provided recycled content information but it's for the buckets their product comes in.