Hello, We have received a review from LEED saying that for the baseline model there are inconsistencies between the demand values reported in Table EAp2-5 and Table 1.4. When completing Table 1.4

I have a letter from the manufacturer stating that the laminating adhesive that will be used in the fabrication of the doors contains no added formaldehyde. (NAF).

Do you know where I can get a list of all the required standards in LEED v4 in a single unifed list? I am looking for the ones we most work with- i.e. ASHRAE 90.1, 62.1, etc.

Dear all, I'm now working on a project (office building, new construction) under LEED NC v2009 Certification.

Hello, we have non compliant faucets and showerheads, therefore, we are going to install flow restrictors. Would we need to test them at 60 and 80 psi?

I was wondering if some packaging of products that adress IEQ requirements but also attend one or more MRc1 criteria can be used here, like soap packing. Other question is, shampoo and/or band-aid

Hello, For complicated planning reasons on a large (probably Campus) project some preliminary earthmovement and demolition will take place soon, but the project is not yet registered.

General Question: If a project is submitting their LEED information in the two part Design and Construction approach, do all the of credits which are noted as being "Design" credits have to actual

Is there any tool or program available to see the number of LEED Associates and AP Specialists worldwide?

Could anyone confirm if the case 2 addenda (11/3/2010) could be relevant to Greenfield developments as well? What would the documentation that must be submitted be?