Due to restrictions of the imports set by the National Government early this year, there are no HVAC systems

Should heating and cooling capacities for the proposed design be modeled the same as the baseline (15% and 25% over-sized) or should they be modeled with actual capacities? Thank you

Hi, We are modeling an office building in Moscow. There are large underground parking levels that are heated.

The sentence right above the CI 2009 MRc2 chart clearly says: 'Documentation is required for commingled waste only' but this requirement also seems to apply to 'diverted' waste (by further defini

Hi folks, This prerequisite says that the baseline water flow for lavotory and showerheads should be measured at 60psi and 80psi respectively.

I am using the program above to document IEQc7.1 There is an option for me to calculate the MRT for an individual room. In the project I am working on, I have multiple rooms.

The credit template requires the CO2 sensors to be programmed to generate an alarm when the conditions vary by 10% or more from the design value.

The review comments of the basic Commissioning of our project says the following " it appears that all systems included within the LEED-NC project scope of work have not been included.

It appears that the BDC Material and Resource Calculator (July 2012) provided under the credit resources incorrectly calculates the Regional Material percentage.

I am wondering if the tenant lease agreement can be used to specify undesigned elements for EAp2 similar to how it is used to achieve other credits.