I am working on a building that supplies process cooling water (PCW) to lab spaces. The PCW rejects its heat through a heat exchanger to the chilled water system from a district energy plant.

I found in ASHRAE 62.1-2004 standard that using a vestibule to provide airlock between garage and regulary occupied spaces is a compilant way to limit the entry of exhaust gases. Is it possible to

We have a project on an existing campus which requires that two large cranes sit next to the project on an adjacent turf area.

Hi All, Assuming that one of the hazardous chemical area also has a fresh air supply (in addition to the exhaust), how do we determine if the min exhaust rate (0.5cfm/sq.ft) is achieved.

The usual question from the international market ? How do we rate houses outside continental USA ? Could we make use of a LEED for Home AP who works in the USA ?

Hello, we are currently working on a project and the owner intends to include several smoking rooms for the project.

Would an extended stay hotel be considered residential?

Hello Heather, To answer your questions - 1. Yes that is correct this is the total of structural and non-structural assemblies and components as defined by each in MRc 1.1 and 1.3. 2.

In the precertification form for EA Prereq 2 Minimum Energy Performance after selection of the appropriate compliance path (which in my case is Whole building energy simulation) there is another se

Dear all, I received the following review comment for my school project: "Tables EAp2.4 and EAp2.5 report consumptions for process lighting for both cases, but it is unclear what lighting has bee