I have two questions: I would like to confirm that the weight of fluorescent tubes that I recycled are to be added to total weight calculations used for MR2 although they don't weigh much.

I'm working on a project that is installing steam kettles for commercial food service. The equipment consists of two 6-gallon kettles mounted on a modular base.

Could we get a confirmation on whether the utility release form is still applicable?

To generate baseline for HVAC systems, the building total SF is 28000 including walk-in coolers and an outside mechanical room. My question is, Can I model the walk-in cooler separate?

We have a building under construction now for which we will pursue LEED certification.

The conference center I'm working on has several small meeting rooms that have interior and exterior doors with the exterior doors leading to open public terraces.

Has anyone used/documented the LEED for Healthcare SSc9 "Places of Respite" credit as an ID credit in the LEED for Schools rating system?

We are submitting a 90,000 SF Humanities Building on a commuter campus. The agency owner has eliminated practically all interior parking over the last 5 years.

I am working on a LEED CS 2009 project and the owner of the building is building an off-site solar farm in a different town in the same state as the building he also owns and is going to be buildin

Under what category should I assign the Sherwin Williams Pro Industrial Pro-Cryl Universal Primer? This is an acrylic primer.