Hello all, We have an office project which utilizes waste heat from the neighbor landfill gas plant. The plant and office is owned by the same company.

Our project is located in an urban environment, we are just a few yards short of fulfilling the requirements. Our project is expected to have as little as 5 FTEs, potentially even less.

The Definition of interior/exterior in the LOW-EMITTING MATERIALS credit is a bit confusing for me.

According to the LEED v.4 credits, it is possible to use different emission tests outside the US to comply with the requirements. AgBB and DiBt testing method (2010) are mentioned there. But accor

Hello all, we are going to use ASHRAE 90.1-2010 for our LEED v2009 project in Germany. One problem pops up recently.

We are pursuing LEED credits for a Workshop/Office Building in Munich Germany.

For the documentation of fuel-efficient vehicles in Germany, we were wondering if a vehicle meeting the EURO 6 limit is eligible? Within the guidelines for ACP in Europe for BD+C, it is stated tha

Hello, a question concerning IEQc8.1 & IEQc8.2 . Can we use the net floor area instead of gross floor area for the simulation in Matrix_Table IEQ-1 Daylight and views? I would like to use t

I am working on a school project and actualy calculating WEp1. I am wondering that the default fixture use for a school indicate no daly uses for a shower for students.

In conducting the commuter survey according to Option 3 / Approach 2 I am would very much appreciate your feedback on the following topics. The multifunctional building is occupied by 1250 regular