Forum quick links
n/a
NC-v4 EQc5:Thermal comfortposted by Anaïs P on
Hello, I am working on trying to obtain the indoor environmental quality-thermal comfort credit for a new construction. The building contains new open-office workstations.
Minimum exhaust Rates
CS-2009 IEQp1:Minimum indoor air quality performanceposted by Elodie DUMAS on
Dear all, We work on a private office building where toilet facilities are composed of several individual toilet rooms. Reading the ASHRAE 62.1, we are not sure about the occupancy category of thes
satisfaction surveys - Ergonomics strategy
Pilot-Credits EQpc44:Ergonomics approach for computer usersposted by Jean-Baptiste SARFATI on
Are there standardized satisfaction surveys for ergonomics workstations in a store ? We would like to evaluate METWAs, furnishings, and accessories to ensure they continue to meet the diversity of
Plastic Sheeting to Protect Raised Technical Floor
CS-2009 IEQc3:Construction IAQ management plan - during constructionposted by Ian McCall on
Hello, The installation contractors state that on previous LEED projects they have placed down plastic sheeting down in order to protect the raised technical floor.
Sound transmission for moveable partitions
NC-v4 EQc9:Acoustic performanceposted by Anaïs P on
Do the requirements about sound transmission have to be applied for moveable partitions in open-plan office? Achieving the STC values from table 1 betweeen two standards offices separated by a move
Certify only one floor among three floors that are rented
CI-v4 MPR2:Must use reasonable LEED boundariesposted by Diana Nezamutinova on
Would you please advise if one newly acquired floor of a 3-floor office eligible to get certified under LEED v.4 Commercial Interiors (see details below)? - A company XYZ has been renting 2 adjac
Pilot credit # 45
Pilot-Credits SSpc45:Site assessmentposted by Devani PERERA on
I do agree with Loic that in France, projects that pursue the french certification HQE would perform a site analysis to assess the needs, opportunities and issues that need the most attention.
EAp2:Table 1.4 based on ASHRAE 90.1-2010
CS-v4 EAp2:Minimum energy performanceposted by CHRISTOPHE MATHIEU on
Hi all, I have a project CS LEED v4 and I couldn't found a table 1.4 with the new 90.1-2010 Standard on the LEED website. I have read that I can present the table 1.4 based on 90.1-2007 standard
C&S or NC ?
posted by Claire PIMET on
I’m contacting you regarding a project in the center of Paris. The client wants to go with a LEED certification on this project.
Green e energy equivalency EKOenergy
CI-v4 EAc6:Green power and carbon offsetsposted by Valentin Grimaud on
Good afternoon, I'm working for a design building company in France. We aim the LEED certification for a shop project. We try do get 2 points for the Green Power and carbon offset credit.