Forum quick links
Proposed case cooling capacity reducing energy savings
NC-2009 EAc1:Optimize Energy Performanceposted by SSN Energy Model on
Hi, I am doing energy simulation for G+4 Labor Accommodation building. In base case, i have considered 2.66 COP.
LEFEV Parking spots in shared garage w/ no dedicated spaces
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by ELIZABETH REITER on
Regarding Option 1 of providing preferred parking for LEFEV for 5% of the total vehicle parking capacity of the site. Here is our issue/question.
Estimating the energy cost share of PV
NC-2009 EAc2:On-Site Renewable Energyposted by Mohamed M. Abd Elhameed on
I am working on an industrial LEED project in KSA.
water cooled chillers
NC-2009 EAp2:Minimum Energy Performanceposted by sherif el adly on
Hi Marcus, I am working on a project in KSA of about 404330ft2.
green power source
NC-2009 EAc6:Green powerposted by sherif el adly on
The client have a solar park in a land adjacent to the land on which the project will be built.
Exterior lighting for group certification
NC-2009 SSc8:Light Pollution Reductionposted by Mohamed M. Abd Elhameed on
I am currently working on a project with multiple buildings within the LEED boundary. The project will follow group approach registration via campus guidance.
Ashrae 90.1 2010 Appendix G
NC-v4 EAp2:Minimum energy performanceposted by junaid naseer on
Do we need to follow addendums of ASHRAE 90.1 2010 in relation to Appendix G for compliance? For instance, addendum F restricts window to wall ratio to 34% for hotel/motel with rooms greater than
Estimating the energy cost share of PV
NC-2009 EAc2:On-Site Renewable Energyposted by Mohamed M. Abd Elhameed on
I am working on an industrial LEED project in KSA.
Inspection Reports - responsible party
NC-2009 SSp1:Construction Activity Pollution Preventionposted by komal kotwal on
Is it required that the on-site inspection be conducted by a third party or can a Contractor's representative conduct the same?
100% certified wood
NC-2009 IDc1:Innovation in Designposted by Abdulla Anwar on
Dears, Our project is aiming for innovation design credit of 100% FSC certified wood, my concern is about does (FSC mixed) certified product contributing to this credit or only the (100% FSC) cert