Forum quick links
modeling with air cooled chiller
NC-2009 EAp2:Minimum energy performanceposted by sherif el adly on
the building size is mandating to model the baseline with a water cooled chiller and I will compare the baseline with the design which is using HVAC that is (air cooled chiller + ice storage + dive
smoke leakage test for duct
NC-2009 IEQc3.1:Construction IAQ management plan - during constructionposted by Abdulla Anwar on
Our MEP sub-contractor need to clarify if we can use an smoke capsule for duct leakage test, prior to final air leakage test since the project specs is giving a small allowable 1% from basis of des
Gypsum board recycling resource, Saudi Arabia
NC-2009 MRc2:Construction waste managementposted by Shreepad Bandagi on
Wondering if anyone would have a resource for gypsum board recycling anywhere in Saudi Arabia. Thanks!
CxA role
NC-2009 EAc3:Enhanced commissioningposted by Abdulla Anwar on
Can you advise the CxA role if it was a part of Owner organization? .......................... by the way what is the commissioning developed plan CxP?
Baseline System 2
NC-2009 EAc1:Optimize energy performanceposted by SSN Energy Model on
As per Table 6.8.1D, I observed the following EER = 12.3-(0.213*Cap/1000) EER Also, Cap means the rated cooling capacity of the product in Btu/hr.
Concrete as Temp barriers
NC-2009 MRc2:Construction waste managementposted by Ahmad Gabir on
Hi , We are working on Mega project is Saudi Arabia where we are using the concrete waste to build Safety road/excavation barriers which will be used on site during construction instead of purchasi
SSp1 and EPA in KSA
NC-2009 SSp1:Construction activity pollution preventionposted by Michela Tedeschi on
We are working on two projects located in Saudi Arabia under LEED 2009 certification. We are looking for finding the appropriate measures to be applied, as per EPA’s Construction General Permit an
Core and Shell Scope & Tenant Scope
CS-2009 MRc5:Regional materialsposted by Osama Hassan on
Hi, Project is registered on Core & Shell rating System CS V2.0. When i was working on Regional Material Credit MRc5, I found two Options.
Infill Site
ND-Plan-v4 SLLp1:Smart locationposted by Jos Schild on
Is there a definition of an 'infill site'?
LEED Preferred Parking
CS-2009 SSc4.3:Alternative transportation - low-emitting and fuel-efficient vehiclesposted by Saud Abdul Rasheed on
Hi all, We have received our Final Design Review and the credit has been denied. Now we want to appeal for the credit as the client is willing to provide Low Emitting and Fuel Efficient Vehicles.