I am currently working on developing the baseline building for our Energy modelling and I'm stuck on the following point of Table G3.1 point 13. "If the simulation program cannot model a component

hi all, we are doing a feasibility study on a CS major renovation project located in South Italy.

Can we consider the IBR (Institut für Baubiologie in Rosenheim) an approved seal which is compliance with LEED v4 requirement for VOC emissions? Attached you will find information regarding VOC te

We are trying to find a specific adhesive for PVC pipes.

What space type shall be considered for a wellness center (e.g.

In the office the air (cold in summer, warm in winter) is both wall supplied and ceiling supplied. The air is exhausted from the WCs.

We are doing a ID+C in a existing building, where the lighting and the envelope are the original ones.

Dear all, I would like to know if it is mandatory to comply with minimum exhaust rates indicated in TTABLE 6-4 Minimum Exhaust Rates from ASHRAE 60.1 -2010.

Can the document "Treatment of District or Campus Thermal Energy in LEED V2 and LEED 2009 – Design & Construction" be used also for LEED v.4?

Hi everyone, I'm having trouble finding datasheets with the reflectance values for the project I'm working on.