Forum quick links
Using LEEDv4 Fundamental and Enhanced ECx to achieve ID LEED2009
NC-2009 IDc1:Innovation in Designposted by Candice Rogers on
Hello, This question has 2 parts. 1). Our project would like to submit LEEDV4 Fundamental and Enhanced Cx for Envelope only as ID points in a project registered for LEED 2009.
What is included in MR Credit 7
EBOM-2009 MRc7:Solid Waste Management—Ongoing Consumablesposted by cathy keagle on
In our latest review we were told that landscape waste is not to be included in the calculations for this credit. This appears to be inconsistent with your opening guidelines.
Drain Water Heat Recovery System
NC-2009 EAp2:Minimum Energy Performanceposted by Luis Barros on
A client wants to utilize our Zypho Drain Water Heat recovery system for a hospitality project. The client wants to confirm the availability of LEED credits.
Enter way/Filling out the Form
CI-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Bridgett Weaver on
Working on a project that the occupancy of the building is a multi-tenant.
Frit on Glazing for LEED-2009
NC-2009 IEQc8.2:Daylight and Views—Viewsposted by Sara Zoumbaris on
Hello, I posted this question on an older thread but will start a new discussion here.
Are exceptions mandatory or optional?
NC-2009 EAc1:Optimize Energy Performanceposted by John Krutko on
Under ASHRAE 90.1 - G3.1.1 do I HAVE to use exception C for any zones having special pressurization relationships, cross contamination requirements, or code-required minimum circulation rates?
The vent calcs indicate a total area significantly lessthan Plf2
NC-2009 IEQp1:Minimum IAQ Performanceposted by Matt Dem on
Hi, Can please someone give his/her suggestion on the question I have below ? I received a comment for (Design Preliminary Submission) ventilation calculations indicate a total area (3,055 sqf)
Dining Halls
NC-2009 EAc4:Enhanced Refrigerant Managementposted by Laura Charlier on
Does anyone have any experience earning compliance with this credit in a Dining Hall application?
VOC content for Shop applied finishes
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Jeremy Mendenhall on
We are new to the Leed program and wanting to make sure that we are following all of the guidelines, we have received some instruction however I'm trying to get confirmation that shop applied fini
Floor Coating that Exceeds VOC Limit
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Amanda Atkinson on
We have two CS v2009 projects in which a single epoxy floor coating exceeds the allowed VOC content. All other flooring products and coatings are compliant.