Post a question or comment
Location Filters
Filter by location
Forum
Topic
Replies
Recent

School with unusually large amount of artificial turf

Schools-2009 SSc5.2:Site Development—Maximize Open Space
posted by  Helen Kessler  on 

100% of the athletic areas for an urban school are made of artficial turf. It's my understanding that this would be counted as hardscape under SSc5.2.

4
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Wed Nov 25, 2015, 2:40 am

CI Lighting Compliance Exemption out of scope

CI-2009 EAp2:Minimum Energy Performance
posted by  Alexis Voeltner  on 

Our CI project does not have lighting included in its scope (very cost prohibitive, for the way lighting is layed out in the space) and base building lighting is being planned to be used as is.

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Mon Nov 23, 2015, 4:04 pm

Leed AP Exam

General forums
posted by  brazer bozlak  on 

Does anybody have good suggestions and tips for studying for the LEED AP BD+C exam.

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Sun Nov 22, 2015, 4:22 pm

new floor in existing building envelope

NC-2009 PIf2:Project Summary Details
posted by  KIMBERLY KRAFT  on 

Hello LEEDUsers, We are submitting a project for LEED NC v.2009 - major renovation and new construction.

2
Default Avatar
Principal
In Balance Green Consulting
LEEDuser Premium Member
0 thumbs up
Sat Nov 21, 2015, 4:24 pm

AP Certification on v2009

CI-2009 IDc2:LEED Accredited Professional
posted by  Paul Duva  on 

I am working on a v2009 LEED project and am the currently the LEED AP on the project for our IDc2 credit. I originally had a LEED AP & a LEED BD+C, however my BD+C has expired.

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Mon Nov 16, 2015, 11:27 pm

Dorm Suite Ventilation

NC-2009 IEQp1:Minimum IAQ Performance
posted by  BAOQUY VU  on 

Our project is a large high rise dorm consisting of 4-person suites arranged typically as a 2BR and two 1BR's connected by a short inner hallway.

2
Sat Nov 7, 2015, 2:08 am

Modeling additions and alterations

NC-2009 EAp2:Minimum Energy Performance
posted by  Cory Duggin  on 

Table G3.1 section 2 a says one of the requirements to exclude parts from the model is that "Work to be performed in excluded parts of the building shall meet the requirements of Sections 5-10."

5
Senior Energy Wizard
TLC Engineering Solutions
LEEDuser Premium Member
44 thumbs up
Fri Nov 6, 2015, 9:09 pm

Help modeling heating only building

NC-2009 EAc1:Optimize Energy Performance
posted by  Logan Dorrell  on 

We are modeling a building in EnergyPro that is heating only, with radiant heating panels and ventilation thru DOAS.

3
Default Avatar
Energy Modeler
KJWW Engineering
LEEDuser Basic Member
3 thumbs up
Fri Nov 6, 2015, 7:58 pm

Green Cleaning in a Semiconductor Fab???

EBOM-2009 IEQc3.1:Green Cleaning—High-Performance Cleaning Program
posted by  David Gibney  on 

I posed this question for a NC-2009 project a week ago and received no replies, so thought I'd re-post it here: I'm working on a semiconductor fab that is part of a LEED campus project.

7
Tue Nov 3, 2015, 10:35 pm

50% or Residents and Buildings with Access

ND-v2009 SLLc3:Locations with reduced automobile dependence
posted by  Sara Zoumbaris  on 

My question is in regards to the 50% requirement of residents and the # of weekday trips.

2
LEED AP-ND, Principal
Criterion Planners
LEEDuser Expert
231 thumbs up
Mon Nov 2, 2015, 6:15 pm