How do I set which the fan power limitation adjutment pressure drop I use at baseline? The standard display multiple values for MERV filters, exhaust and others. What should I use at baseline?

Hello, we are working on a project, an addition to an existing building and we would like to certify but don't know if LEED NC would apply.

We are working on a new shopping mall. as usually in my country, a anchor store (tenant deparment store) was first developed and constructed, and now is operating.

Hello we are working on a rehabilitation project for a small hotel being developed in an existing historic building in Quito, Ecuador.

I would like to know if electric motors that are going to be operated by a VFD (Variable Frequency Drive), need to comply with the eficiency requirements of the ASHRAE 90.1 table 10.8. Thanks

Greetings from Peru I am a student of which I would like to know what to do in the case of minimum energy performance of a commercial interiors when you start from scratch and there is no informat

We have a leased office in a LEED C&S project.

The LEED v4 Guide steps that it's possible only apply any savings from ON-SITE renewable energy systems?

We have a project in Rio de Janeiro registered under CS and to which the fan door test shall be conducted since it is composed of three residential buildings.

I'm working on an office project, and there's an atrium. We want to use a translucent and permeable tensioning fabric on the roof of this atrium. Could this structure be considered a shade?