Forum quick links
Outdoor Airflow Measurements and Potential Corrective Action
EBOM-v4.1 EQp1:Minimum Indoor Air Qualityposted by CT G on
We are currently working on a project in which, during the outdoor airflow measurements, we identified that the ventilation fans were delivering significantly lower outdoor airflow rates than requi
Implementation of Water Leak Detection and Monitoring Pilot
NC-v4 INc1:Innovationposted by Lorena Montenegro on
It is not clear what the action plan must have in order to comply with the requirements of the credit.
v4 DES option 1 path 2 full performance accounting
NC-v4 EAp2:Minimum energy performanceposted by ami patel on
I have a Zone 2A 6 story new construction residential dorm building uses ERU DOAS(gas fired(steam not generated on site but campus loop +DES chilled water) that provide outside air to fan coil unit
Thermal comfort - individual Occupancy – LEED Credit Consideration
NC-v4 EQc5:Thermal comfortposted by Jayaprakash Murali on
Hello,
Peak Chiller Load to be considered for base case model
CS-v4 EAp2:Minimum energy performanceposted by Nikunj Verma on
Hi All,
Baseline pressure drop adjustments
NC-v4 EAp2:Minimum energy performanceposted by Boris Jonjic on
Hi all,
I've got a question about calculating the pressure drop adjustments for a baseline building. I'm using LEED v4, ASHRAE 90.1 2010.
ASHRAE 90.1-2016 Appendix G Baseline Heatsource
CI-v4 EAp2:Minimum energy performanceposted by Eric Dyer on
Hello,
We are working on a LEED v4.1 BD+C project where the proposed design uses both District Hot Water (Purchased Heat) and District Chilled Water (Purchased Cooling).
Issues Minimum Energy Performance Calculator
NC-v4 EAp2:Minimum energy performanceposted by SAMY Chamy on
Dear All:-
we have working LEED Group Project Building with 5 nos of Building
Review comment on PV-A report
NC-v4 EAp2:Minimum energy performanceposted by Rathnashree Bharadwaj on
Dear all,