We are working on a project where the owner/architect has elected to satisfy the requirements of this credit with overhead diffusers controlled by remote controls placed in individual workstation c

I currently have a project on a military base that was denied this point because "not all of the listed services have sidewalk pedestrian access from the project site....dirt trails do not meet the

The LEED Project Submittal Tips guide for C&S from GBCI (published 12/23/2011) states that EBOM WEc4.1 Cooling Tower Water Management is allowed in BD&C v2009 as an ID credit.

We are pursuing IEQc1 and we would like to use CO2 sensors connected to an Open Source Arduino micro controller in order to manage the alarms, interface with other systems and publish to Pachube (h

Hello, everyone, I just wanted to have clarification regarding the LEED AP, if we have in the design team or in the team undertaking the Assessment someone who is a LEED AP.

Our project has very limited landscape options and I just found out about the offsite land donation. We are by no means familiar with the Land trust nor the EPA level III ecoregion.

Hi all, When I look into the sample form downloaded from LEED ONLINE, the "Table IEQc2-4.

Do we need to comply with the ventilation rates in Table 6-1 (ASHRAE 62.1-2007) for electrical rooms, lift machine rooms, electrical rooms etc?

I'm working on a project in an urban space that have Local Zoning Ordinance.

We have a project over 50,000 sf in DD phase and are in early talks with a potential Facility Manager. Can a FM or a disinterested party from that FM firm serve as a CxA for EAc3?