After two rounds of review EAp2 was denied although we reckon that we had totally addressed all comments of the preliminary review and additionally the issues described as outstanding in the final

In idiot terms could someone please tell me what makes up an "assembly". I am a glazing contractor working on a LEED project. I have two items needing LEED submittals for the MR4 credit.

Hello, I checked on page 185 of the BD+C Reference as mentioned by William in a previos post, and did not see anything about species factors.

Hi All, Does anyone have any experience with LI#10397? This LI# stipulates an alternative compliance path for facilities that have 60% or more non-regulated loads. QUESTION 1: I cannot find any

I find the credit language very confusing.

Hi All, We have a campus with a substation on-site (on owner's property) that will be owned by the local utility.

We are working on a huge project in Riyadh, to meet EAp2 we sould look for a water cooled chiller due to the area of the project and the challenge to reach a COP near to 8 to meet the 10% from base

Hello: I have a question related to exception G3.1.1.c which states that a separate single System 3 should be used for zones with pressurization relationships or minimum circulation rates.

Hi, I just read requirement of EAc1 on USGBC web page, is it true that all LEED New Construction projects registered after 8 April 2016 have to reach 18% - 4 points at minimum.

I am not clear on how this threshold is applied. Is this a cap, meaning, if steel/ concrete is over the 75% then any amount over won't count towards MRc3?