Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Best Timing for ASHRAE Audit?

EBOM-2009 EAp1:Energy Efficiency Best Management Practices
posted by  Nelina Loiselle  on 

What is the best timing for the ASHRAE Level I walkthrough audit? We have our energy star label already, are working on getting our tracking in place for the other credits.

1
Thu Oct 18, 2012, 8:21 pm

Core Fixtures Existing, Tenant to Install Additional Fixtures

CI-2009 WEc1:Water Use Reduction
posted by  Nelina Loiselle  on 

I have a LEED-CI project in which there is one toilet that is EXISTING in the base building and NOT A PART OF THE SCOPE of the tenant improvement.

1
Thu Oct 18, 2012, 11:11 pm

Motorcycles parking space

EBOM-2009 SSc7.1:Heat Island Reduction—Nonroof
posted by  Rosana Correa  on 

In our project, some of the parking spaces are specific to motorcycles, with smaller areas than in car's spaces.

1
Fri Nov 23, 2012, 4:07 pm

Category for IEQ Credit 4.1

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  S D  on 

I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.

1
Mon Nov 26, 2012, 6:44 pm

I wonder how I should model a Ventilation system

CS-2009 EAc1:Optimize Energy Performance
posted by  Ron Dean  on 

I wonder how I should model a Ventilation system to comply with Apendix G ASHRAE, it said that my proposed desing shall be consistent with design documens.. This is the description of my system: &g

0

LEED Boundary for ESA

Schools-2009 SSp2:Environmental Site Assessment
posted by  Karen Richards  on 

If doing a 3,700 sf building in the corner of an existing 18 acre school campus, does the Phase I and possibly Phase II assessment need to be for the entire campus or just the area within the LEED

1
Mon Oct 22, 2012, 4:35 am

How to identify third-party certifying bodies?

ND-v2009 GIBc1:Certified green buildings
posted by  Shenhao Li  on 

As subject indicated, how to identify third-part certifying bodies as defined by ISO/IEC 17021.

1
Wed Oct 24, 2012, 4:41 pm

no composite wood products

CI-2009 IEQc4.4:Low-Emitting Materials—Composite Wood and Agrifiber Products
posted by  Adam Targowski  on 

What if the tenant was not installing any composite wood products within his scope of work? Does it mean that he get's this point automaticly or that he is not eligible for that point?

1
Fri Oct 19, 2012, 3:33 pm

Energy Recovery Units - Baseline and Proposed Design ERUs

NC-2009 EAc1:Optimize Energy Performance
posted by  Carlton Ross  on 

We have an existing facility (bus maintenance garage) which is attempting to be Certified.

1
Mon Oct 22, 2012, 2:07 pm

Reasonable Site Boundary & Min. Building Area to Site Area Ratio

NC-2009 PIf1:Minimum Program Requirements
posted by  Greengrade User  on 

Schools often cannot afford "choice" sites. We have a school with a 155 acre site, 70% of the site is a wetland.

1
Wed Oct 24, 2012, 11:14 am