| Topic | Recent |
|---|---|
Building Product Disclosure and Optimization- Social ResponsibilityLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Steven Kooy on Oct 28, 2024, 3:33 pm
With respect to social health and equity, BIFMA recommends third party certification at the product level. The product manufacturer may conduct it's own social responsiblity audits versus a... |
|
Building Product Disclosure and Optimization, Additional Resources (Table 2): Product Documentation Multi-Attribute ScoringLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Michael Scharpf on Oct 25, 2024, 7:52 am
Propose to adding CSC to the eligible certifications in this section, with applicability across Climate Health, Human Health, Circular Economy and Ecosystem Health... |
|
Open Building Product Disclosure and Optimization credit for structural materialsLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Michael Scharpf on Oct 25, 2024, 7:19 am
The scope is limit to finishing products only, whereas structural materials account for +60% of a building's mass. Beyond climate protection, the responsible sourcing of construction... |
|
MR Prerequisite- Assess Embodied CarbonLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Rockford Boyer on May 24, 2024, 11:29 am
"Board and Foam Insultation" needs to be more clearly defined (i.e. Mineral Wool, Mineral Fiber, XPS, EPS, Spray Foam). Does the "Board" definition identify ALL insulation boards or just foam... |
|
LEED v5- feedbackLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Veronika Elfmarkova on May 24, 2024, 4:31 am
Inclusion of cement in the prerequisite does not make sense, as its emissions are already accounted for in the concrete. Concrete Sustainability Council (CSC) responsible sourcing... |
|
LEED v5- FeedbackLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Veronika Elfmarkova on May 24, 2024, 4:28 am
Dear all, I have attended the webinar and please see comment below: Comment: Structural... |
|
Regional/country-specific (non-US) benchmarks should be allowed outside the U.S. for the right assessments.LEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Hiro Iwashita on May 24, 2024, 7:20 pm
Our comment/proposal is related to "MR Prerequisite: Assess Embodied Carbon", "MR Credit: Reduce Embodied Carbon" and "Optimized Building Products". ... |
|
Materials and Resources CommentsLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by JJ Beasley on May 24, 2024, 4:43 pm
Assess Embodied Carbon: I suggest that the benchmark values for concrete should vary by region. In the USA, the NRMCA LCA values are typically used across the engineering industry... |
|
LEED v5- Construction and Demolition Waste Management CreditLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Michael Orbank on May 24, 2024, 12:52 pm
As a construction sustainability practitioner who is neck deep in LEED, C&D... |
|
Materials and Resources CommentsLEED v5 BD+C/ID+C: Materials and Resources Public Commentsposted by Indya Rogers on May 23, 2024, 2:31 pm
ASSESS EMBODIED CARBON The beginning of the first sentence is describing cradle-to-gate (A1-A3) embodied carbon, not upfront embodied carbon. The second part of the... Last reply: Laura Castanon, May 24, 2024, 8:19 pm |
