Post a question or comment
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Lighting Controls

NC-2009 IEQc6.1:Controllability of Systems—Lighting
posted by  shaun Andriano  on 

Our IEQc6.1 credit was approved during the design phase based upon the following: The space is a large open area with cubicle workstations.

4
Default Avatar
shaun Andriano
Project Manager
C2 Design Architecture
LEEDuser Basic Member
23 thumbs up
Tue Mar 29, 2011, 5:37 pm

Submittals - does one need to upload spec sheets?

CI-2009 WEc1:Water Use Reduction
posted by  Patricia Ewanski  on 

Simple question - My project is not yet registered so I can't see what documenation is necessary to substantiate claims of water efficiency.

3
Tue Mar 29, 2011, 4:11 pm
Default Avatar

LEED certification without heating and cooling systems

NC-2009 EAp2:Minimum Energy Performance
posted by  Felipe Duran  on 

I am working on a school project and it does not consider a heating system nor a cooling system at all ¿Is it possible to certified a building which does not have a these systems and therefore the

5
Profile picture for user dhubka
David Hubka
Director of Operations
Transwestern Sustainability Services
LEEDuser Basic Member
355 thumbs up
Tue Mar 29, 2011, 1:04 pm
Default Avatar

Water Use Reduction calculations - kitchen / food service sink

posted by  Gendel Metlitsky  on 
3
Tue Mar 29, 2011, 12:57 pm
Default Avatar

Existing LIghting - Commercial Interior

posted by  John Bauer  on 
9
Profile picture for user conradpaul1
Paul Conrad
Energy Engineer
CLEAResult Consulting
LEEDuser Basic Member
222 thumbs up
Tue Mar 29, 2011, 7:41 am
Default Avatar

Single Ply Roof Membrane Adhesives

posted by  Dwayne Wacenske  on 
15
Tue Mar 29, 2011, 4:29 am
Default Avatar

7th ed. Massachusetts Building Code and ASHRAE 62.1-2004

posted by  Paul Girello  on 
8
Tue Mar 29, 2011, 4:23 am
Default Avatar

Commingled materials?

CI-2009 MRc2:Construction Waste Management
posted by   Habitech Distretto Tecnologico Trentino  on 

Hello. We are working on a CI project. We have only three types of waste (mixed materials, mix of concrete and mix of gyps), with three different containers.

3
Tue Mar 29, 2011, 4:14 am
Default Avatar

economic assessment

EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiency
posted by  Pablo Fortunato Suarez  on 

What the client has is a project for proposed upgrades since the building is quite old, making upgrades necessary.

3
Default Avatar
Amy Balderrama
Project Manager
SSRCx, LLC
LEEDuser Basic Member
7 thumbs up
Tue Mar 29, 2011, 2:07 am
Default Avatar

outdoor air unit system type

NC-2009 EAp2:Minimum Energy Performance
posted by  Ana Davidovic  on 

I have a project that is classified as a high rise residential building.

3
Mon Mar 28, 2011, 9:28 pm